AFG-2225 Dual-Channel Arbitrary Function Generator

T&M Equipment → Signal Generators & Frequency Counters → Arbitrary Function Generators → AFG-2225 Dual-Channel Arbitrary Function Generator

Sipariş No : GW-AFG-2225

AFG-2225 Dual-Channel Arbitrary Function Generator

2 Channel 25MHz Arbitrary Function Generator

Wide Frequency Ranges From 1μHz to 25MHz (sine/square wave)

1 μHz Resolution in Full Range

Built-in Standard 120MSa/s, 10bit, 4k Points Arbitrary Waveform for Both Channels

True Dual-Channel Output, CH2 Provides the Same Characteristics as CH1

Couple, Tracking, Phase Operations of Dual Channel are Supported

1% ~ 99% Adjustable Duty Cycle for Square Waveform

High Resolution and Colored TFT LCD with Friendly User Interface

Multiple Editing methods to Edit Arbitrary Waveform Easily

Built-in Standard AM/FM/PM/FSK/SUM/Sweep/Burst and Frequency Counter

USB Host/Device Interface for Remote Control and Waveform Editing

User can also use the arbitrary waveform PC software to edit the waveform and then send to AFG-2225 directly, or save the waveform into flash drive and then transfer to AFG-2225.

 

Model/Option Selection Matrix
Stock Code:
GW-GTL-110
Details:
BNC to BNC RF Cable
Option Type:
Option-HW
Stock Code:
GW-GTL-246
Details:
USB Cable, USB 2.0 Type A – Type B, 4P
Option Type:
Option-HW
Stock Code Details Option Type
GW-GTL-110 BNC to BNC RF Cable Option-HW
GW-GTL-246 USB Cable, USB 2.0 Type A – Type B, 4P Option-HW

Tender Specifications

1. The device should have two channels capable of generating frequencies with an accuracy rate of 1µHz between 1µHz and 25MHz.
2. The sampling rate of the device should be at least 120Msa / s.
3. Rise / fall time of the device should be maximum 25 nS.
4. The device should be able to generate sine, square, ramp, noise and arbitrary waveform.
5. The device should have AM and FM modulation capability.
6. The waveform length produced by the device should be at least 4k.
7. The device must have at least 10bit amplitude resolution.
8. The screen of the device should be 3.5 inch TFT LCD.
9. The dimensions of the device should be maximum 266x107x293 (mm).
10. The weight of the device should not exceed 2.5kg.
11. The device should generate waveform in at least four ways.
12. The device must have at least USB interface support.
13. Power Cord, User Manual, measurement probe should be provided with the device.
14. The device must have at least 2 (two) years warranty certificate prepared by the vendor.

Download Product's Tender Specifications

Videos

Related Products

0