Teknik Bilgi

   - Best Overhead Ionizer Now Available from Charleswater
   - Low Balance (Offset Voltage)
   - Balance ±3 volt, typically; ±5 volts maximum controlled via Desco EMIT patented Auto-Balancing Sense Feedback
   - RS-485 Communication for Use with EMIT SIM Software
   - Compatible with EMIT SIM Software  
   - Fast Discharge Time
   - Tested at 3.1 seconds Neutralization Discharge Time under fan 1,000 volts to 100 volts per ESD S3.1 (18" under fans)
   - Data Acquisition
   - Data acquisition via RS485 to computer recording levels of performance at all times
   - Calibration
   - Easy to adjust or calibrate with control buttons on the unit, no adjustments tools are needed. Optional battery operated hand-held Infrared Remote Control to adjust offset voltage (balance), and maintenance and alarm levels (using Charged Plate Monitor)
   - Overhead installation with two 9-speed fans
   - Up to 124 units can be daisy-chained into one serial port
   - Optional Remote Control Available
   - Model 50669 I/R remote control can be used to remotely adjust balance, fan speed and alarm settings up to 9 feet away.
   - 5 Year Limited Warranty
   - CSA Approved
   - Compatible with EMIT SIM Software
   - Made in the United States of America
   - Low Ozone Emissions – tests well below the OSHA limit of 0.05 ppm ozone

*U.S. Patent 6,205,408

“Ionizers should be considered as a method for charge neutralization in cases where grounding cannot be achieved. These may include localized (bench) ionized air blowers, compressed air ionizers, spot ionizers, tape dispenser ionizers and total room ionizers.” “Air ionization can neutralize the static charge on insulated and isolated objects by producing separate charges in the molecules of the gases of the surrounding air. When a static charge is present on objects in the work environment, it will be neutralized by attracting opposite polarity charges from the ionized air. Note that ionization systems should not be used as a primary means of charge control on conductors or people. As with all ionizers, periodic maintenance will be needed to provide optimum performance.” (EN 61340-5-2 paragraph 5.2.9)

“Various feedback and auto balance techniques are available to ensure ionizer performance. … Providing a sensor for each ionizing device can improve feedback control. Effective control can reduce the amount of necessary maintenance. (EN 61340-5-2 paragraph 5.2.9.2 Monitoring and feedback control)

Resimler

Ek Dosyalar

Save ×
Save ×

Öneri & Şikayet Formu

Sayın Müşterimiz,

Önerileriniz bizler için oldukça değerlidir.
Firmamız, ürünlerimiz ve hizmetlerimiz hakkındaki tüm önerilerinizi bu formdan bizlere iletebilirsiniz. Aynı form üzerinden herhangi bir şikayetleriniz var ise bizlerle paylaşabilirsiniz.

Talepleriniz, firmamız gizlilik politikası kapsamında Yıldırım Elektronik Kalite Departmanı tarafından incelenecektir.
İnceleme akabinde tarafınız ise en kısa sürede geri bilgilendirilecektir.

Bizlere göstermiş olduğunuz ilgileriniz için teşekkür ederiz.
Yıldırım Elektronik San. ve Tic. Ltd. Şti.



(*)
(*)
(*)

(*)
×

×