• Analogue Compliance Verification Surface Resistance Checker
  Used for determining if a surface is dissipative, conductive or insulative
• Automatic Test Range Voltage Selection Compliance Verification required by EN 61340-5-1
  Starts tests at 10 volts and automatically switches to 100 volts if the measurement is over 10E5 ohms
• Portable Operation with 9 Volt Battery
  No charging or sourcing of special batteries needed
• LED Illuminates When Battery Power is Low
  Prevents operator from making bad measurements
• Test Kit Includes Set of 2.27 kilogram Electrodes and Leads
  Use with the meter to measure resistance point-to-point (Rp-p) and resistance to ground (Rg)
• NIST Calibrated with Certificate
  Calibrated with accepted procedures and standards traceable to the National Institute of Standards Technology
• Made in the United States of America
• Request a Demo HERE
  
  

“In order to be effective the ESD coordinator needs … access to measuring equipment for the purposes of performing compliance verification audits as well as testing new ESD products and materials for use in the ESD program … management must provide the ESD coordinator with the authority and funding necessary to ensure that the ESD control program is maintained and enforced.” [TR 61340-5-2:2008 User guide clause 4.1.1 Assignment of an ESD coordinator]