Designed with class-leading signal integrity and responsive ultra-deep memory, the R&S®RTA4000 brings the power of 10 to a new level.
A Rohde&Schwarz designed 10-bit ADC combined with class-leading low noise, memory depth and timebase accuracy gives you sharp waveforms, more accurate measurements and confidence when facing unexpected measurement challenges.
Key Facts
- 200 MHz to 1 GHz Bandwidth
- Up to 5 Gsample/s Sampling Rate
- Up to 200 MSample Memory Depth (1 Gsample segmented memory, Standard)
- 10-bit ADC Resolution
- 10.1" High-Resolution Capacitive Touchscreen
- 64 000 waveforms/s Update Rate (2 000 000 in Fast Segmented Memory Mode, Standard)
- 500 µV/div to 10 V/div Input Sensitivity
- MSO: 16 Digital Channels (Optional)
- Arbitrary Waveform and Pattern Generator (Optional)
Features & Benefits
Unrivaled signal integrity
- 10-bit ADC resolution: 1024 levels, 4 times more than 8-bit ADC
- 0.6% noise: at 1 mV/div, 200 MHz, 50 Ω; % of full scale
- 500 µV/div vertical resolution: full measurement bandwidth and low noise
Capture more time at full bandwidth
- 200 Msample memory depth: standard acquisition memory
- 1 Gsample: standard history and segmented mode
- ±0.5 ppm: class-leading timebase accuracy
10.1" high-resolution capacitive touchscreen with gesture support
- Gesture support for scaling and zooming
- More than twice the display area compared to similiar oscilloscopes
- Nine times the pixels of comparable oscilloscopes: 1280 × 800 pixel resolution
- 12 horizontal grid lines for more signal details
Capabilities to meet your needs today with insurance for the future
- Acquisition modes
- Math and measurements
- Annotation, R&S®SmartGrid and documentation
- Digital voltmeter
- Mixed signal
- Waveform and pattern generator
- XY mode
- Mask test mode
Frequency response analysis (Bode plot)
- Analyze the frequency response of passive filters and amplifier circuits
- Perform control loop response measurements
- Perform power supply rejection ratio measurements
- Simple and fast documentation
Spectrum analysis: identify interactions between time and frequency
- Spectrogram: display of frequency over time
- Peak Markers: find peaks automatically
Protocol analysis: effıciently debug serial buses
- Protocol aware triggering and decoding for serial buses
- Segmented memory for long time captures
- Table view of packets/frames
| Supported buses |
| Embedded | ► I²C |
| ► UART/RS-232/RS-422/RS-485 |
| ► SPI (2/3/4-wire) |
| Aerospace | ► MIL-STD-1553 |
| ► ARINC 429 |
| Automotive, industrial | ► CAN |
| ► LIN |
| Audio | ► I²S/LJ/RJ/TDM |
Model/Option Selection Matrix
|
|
Stock Code
|
Details
|
Option Type
|
|
|
RS-1335.7700P04-RTA4K-04 |
200 MHz 4 Channel Digital Oscilloscope |
Model |
|
|
RS-1335.7700P34-RTA4K-34 |
350 MHz 4 Channel Digital Oscilloscope |
Model |
|
|
RS-1335.7700P54-RTA4K-54 |
500 MHz 4 Channel Digital Oscilloscope |
Model |
|
|
RS-1335.7700P64-RTA4K-104 |
1 GHz 4 Channel Digital Oscilloscope |
Model |
|
|
RS-1335.7823.02-RTA-B1 |
Mixed Signal Upgrade for non-MSO Models, 400 MHz |
Option-HW |
|
|
RS-1335.7830.02-RTA-B6 |
Arbitrary Waveform Generator |
Option-HW |
|
|
RS-1335.7846.02-RTA-B243 |
Bandwidth Upgrade of the R&S®RTA4004 to 350 MHz |
Option-HW |
|
|
RS-1335.7852.02-RTA-B245 |
Bandwidth Upgrade of the R&S®RTA4004 to 500 MHz |
Option-HW |
|
|
RS-1335.7869.02-RTA-B2410 |
Bandwidth Upgrade of the R&S®RTA4004 to 1 GHz |
Option-HW |
|
|
RS-1335.7681.02-RTA-K1 |
I²C/SPI Serial Triggering and Decoding |
Option-SW |
|
|
RS-1335.7698.02-RTA-K2 |
UART/RS-232/RS-422/RS-485 Serial Triggering and Decoding |
Option-SW |
|
|
RS-1335.7717.02-RTA-K3 |
CAN/LIN Serial Triggering and Decoding |
Option-SW |
|
|
RS-1335.7723.02-RTA-K5 |
Audio (I²S/LJ/RJ/TDM) Triggering and Decoding |
Option-SW |
|
|
RS-1335.7730.02-RTA-K6 |
MIL-STD-1553 Serial Triggering and Decoding |
Option-SW |
|
|
RS-1335.7746.02-RTA-K7 |
ARINC 429 Serial Triggering and Decoding |
Option-SW |
|
|
RS-1335.7752.02-RTA-K18 |
Spectrum Analysis and Spectrogram |
Option-SW |
|
|
RS-1335.7769.02-RTA-K31 |
Power Analysis |
Option-SW |
|
|
RS-1335.7975.02-RTA-K36 |
Frequency Response Analysis (Bode Plot) |
Option-SW |
|
|
RS-1335.7775.02-RTA-PK1 |
Application bundle (consists of the R&S®RTA-K1, R&S®RTA-K2, R&S®RTA-K3, R&S®RTA-K5, R&S®RTA-K6, R&S®RTA-K7, R&S®RTA-K18, R&S®RTA-K31, R&S®RTA-K36 and R&S®RTA-B6 options) |
Bundle |
|
|
RS-1333.1728.02-RTB-Z1 |
Front Cover |
Accessory |
|
|
RS-1333.1734.02-RTB-Z3 |
Soft Bag |
Accessory |
|
|
RS-1335.9290.02-RTB-Z4 |
Transit Case with Wheels for R&S®RTB |
Accessory |
|
|
RS-1333.1711.02-ZZA-RTB2K |
19" Rackmount Adapter for R&S®RTB2000, R&S®RTM3000 or R&S®RTA4000 with 5HU |
Accessory |
|
|
RS-1335.7875.02-RT-ZA19 |
Accessory Case for Probes and Small Parts for all Rohde and Schwarz Oscilloscopes |
Accessory |