Servo Motor Training Set

Technical Training Sets → Control and Automation Laboratory → Servo Motor Training Set

Sipariş No : Y-0047

Servo Motor Training Set

Servo Motor Applications

Through the Servo motor application set,application of servomotor working with loaded - unloaded position, speed and torc control as well as identification of parameter values could be performed.

Load set potentiometer, 2 pcs 0..10V adjusted analogueoutput, servo input and outputs have been configured manual or in the appropriate structure controlled by PLC as well as adjusted pulse generator has been configured by 2 mm sockets on the control panel.

The load assembly was provided on the set by magnetic dust brake engine, coupled by the timing belt. Due to this assembly, control of the speed-torc of the servo engine or control of the position torc could be reviewed.

By means of PC connection, all parameter information could be monitored, amended and recorded.

The torc and speed of the engine could be monitored in the interface and printed out.

In the position controls, the left and right limits could be perceived by the optic sensors. In order to monitor the angular motions, the scaled disc is available on the engine.

Applications :

• Speed control application with external referance voltage
• Speed control application with digital inputs
• Right and left limit application
• Ramp functions on speed mode
• Internal torque limit application on speed mode
• External torque limit application on speed mode
• Torque control application with referance voltage
• Position control application with external pulse
• Internal position control application
• Speed and position control application of servo motor with PLC
• Speed, torque and position control of servo motor under adjustable load

It is suggest to use Y-0047 Servo Motor Training Set with PLC Training Sets from PLC Applications Product Family

Model/Option Selection Matrix

Stock Code:
Y-0030-T2
Details:
Bench Type PLC Training Set
Option Type:
Main Unit

Stock Code:
Y-0030-S4
Details:
Bag Type PLC Training Set
Option Type:
Main Unit

Stock Code:
Y-0030-P
Details:
Panel Type PLC Training Set
Option Type:
Main Unit

Stock Code	Details	Option Type
Y-0030-T2	Bench Type PLC Training Set	Main Unit
Y-0030-S4	Bag Type PLC Training Set	Main Unit
Y-0030-P	Panel Type PLC Training Set	Main Unit

Tender Specifications

SERVOMOTOR TRAINING SET

Through the Servomotor application set, application of servomotor working with loaded-unloaded position, speed and torc control as well as identification of parameter values should be performed.

In the control panel; load set potentiometer, 2 pieces 0..10V adjusted analogue output, servo input and outputs should have been configured manual or in the appropriate structure controlled by PLC as well as adjusted pals generator should have been configured by 2mmsockets.

The load assembly was provided on the set by magnetic dust brake engine, should be coupled by the timing belt. Due to this assembly, control of the speed-torc of the servo engine or control of the position torc should be reviewed. By means of PC connection, all parameter information should be monitored, amended and recorded. The torc and speed of the engine should be monitored in the interface and should be printed out.

In the position controls, the left and right limits should be perceived by the optic sensors. In order to monitor the angular motions, the scaled disc shall be available on the engine.

The servomotor training set should be set by anodized sigma aluminum profile and mounted on the channeled lab desk. In this way, add/drop and replacing process on the system should be done easily. The leg of the table should be locked and it shall be wheeled structure.

TECHNICAL SPECIFICATIONS

Supply voltage : 220 - 240V AC, 50-60 Hz
On-Off switch, Start-Stop Button, Emergency Stop Button and contactor
2 pcs optical sensors for left/right limit
45 cm linear motion mechanism with timing belt
Disk which shows the pitch angels of servo motor
Servo Motor: AC servo 400 W. 3000 rpm. Nom. 1,27 Nm.

Servo Driver :

Speed control, Torque control,Position Control (external or internal) ,Position/Speed, Speed/Torque, Position/Torque working modes
±10V analog input (0-5000 rpm) or digital input (0-3000 rpm) speed and torque control
Monitored or amended. maximum torque (3,82 Nm)
External Position Control (open collector or line driver pulse input); Internal Position Control (by digital inputs, the assigned 64 position)
Windows based monitoring / programming software
Internal USB port to real time data communication and monitoring with PC
Modbus RS-485/RS-232 communication port, CANopen (DS402) high speed network comunication control
8 programmable digital inputs and 5 programmable digital outputs
Home, origin search and position instruction functions.
20 bit (1280000 ppr) high resolution encoder (A/B/Z and Not A/B/Z)
Internal brake unit , Notch filtered, protection functions and alarm messages, monitoring all I / O status
Torque Adjustable Brake Unit : DC 24V, 6 Nm Handling Torque
Control Panel : 2 pcs ±10 volt analog signal, frequency adjustable pulse generator, adjusted load control circuit,
Encoder signal output, monitored by LED input/output signals

SYSTEM SHALL INCLUDE

•   1 user's guide and experiment booklet and application CD
•   Servo driver software CD
•   Servo driver-PC programming cable
•   Min. 20 pcs 2mm test cable

APPLICATIONS :