Step Motor Training Set

Technical Training Sets → Control and Automation Laboratory → Step Motor Training Set

Sipariş No : Y-0026

Step Motor Training Set

Step Motor Applications

Datasheet Tender Specifications

Step motor training set exams driving and control the step motor. On the set, magnetic dust brake engine has been used that has been coupled to the step motor by timing belt. Thus, the positioning and speed characteristics of the step motor under the load have been reviewed.

The standard step angle of a step motor (for example 1,8° centigrade 200 pls/rev) could be divided into 25600 pls/rev by means of driver. The bipolar micro step driver that has been used in the set has the required specifications to allow this process.

The step motor training set was formed by anodized sigma aluminum profile and assembled on the channeled table. In this way, add/drop and replacing process on the system could be carried out easily. The table legs have wheels which could be locked.

Applications :

• Bipolar serial - parallel connection application
• Bipolar micro step application
• Unipolar connection application
• Unipolar full step and half step applications
• Speed applications for unipolar and bipolar drivers
• Application of position & speed and torque control of the step motors under the adjustable load
• Application of position and speed control of the step motors with PLC

It is suggest to use Y-0026 Step Motor Training Set with PLC Training Sets from PLC Applications Product Family

Model/Option Selection Matrix

Stock Code:
Y-0030-T2
Details:
Bench Type PLC Training Set
Option Type:
Main Unit

Stock Code:
Y-0030-S4
Details:
Bag Type PLC Training Set
Option Type:
Main Unit

Stock Code:
Y-0030-P
Details:
Panel Type PLC Training Set
Option Type:
Main Unit

Stock Code	Details	Option Type
Y-0030-T2	Bench Type PLC Training Set	Main Unit
Y-0030-S4	Bag Type PLC Training Set	Main Unit
Y-0030-P	Panel Type PLC Training Set	Main Unit

Tender Specifications

STEP MOTOR TRAINING SET

Step motor training set should exam driving and control the step motor. On the set, magnetic dust brake engine should have been used that has been coupled to the step motor by timing belt.

Thus, the positioning and speed characteristics of the step motor under the load should have been reviewed.

The standard pitch angle of a step motor (for example 1.8° centigrade 200 pls/rev) should be divided into 25600 pls/rev by means of driver. The bipolar micro step driver that should have been used in the set has the required specifications to allow this process.

The step motor training set should be formed by anodized sigma aluminum profile and assembled on the channeled table. In this way, In this way, add/drop and replacing process on the system should be carried out easily. The table legs have wheels which should be locked.

TECHNICAL SPECIFICATIONS

• Step Motor: Full mode 1.8° pitch angle, Holding Torc 3 Nm, Nema24, 2 Phase 8 tipped step motor
• Bipolar Driver: 4.2A 24-50 VDC 1/25600 dissolution bipolar micro step driver.
• Unipolar Driver: 2A unipolar driver
• 220 V supply voltage. 24V DC power voltage
• Control Pannel: Frequency modulated pals generator, LCD displayed Tachometer/Frequency meter, On the drive and control panel 24V supply output Start-stop-emergency buttons, All Input/output signals should be monitored by LEDs

SYSTEM SHALL INCLUDE

• 1 user manual
• Min. 20 quantities 2 mm testing cable

TRAINING SUBJECTS

• Step Motor driving techniques
• Bipolar and Unipolar motor connection applications
• Full mod, half mod and micro step (1/128) mod usage of Step motor
• Reviewing of position, torc and speed application of the step motor under the adjustable load
• Application of position and speed control of the step motors in the mechanic systems